Kenwood KDC-715S Instruction Manual

This function permits the text to be scrolled and the entire textto be displayed. The scrolling method differs depending on thesetting of scrolling in the menu.To scroll automatically:Press the DISP button to display the Radio Text. The display ofthe text will be scrolled repeatedly.To scroll manually:Press the DISP button to display the Radio Text.Pressing the DISP button for at least one second results in onescrolling display of the text.Please see the menu settings (page38) about switching betweenmanual scrolling and automatic scrolling.NOTE21Radio Text ScrollYou can register a station as a program type.To register a non-RDS station as a program type:Tune your radio to the non-RDS station that you want toregister as the program type.Press the PTY button to enter the program type selectionmode.Press the FM/AM button to select the program type you wantto register. Follow the instructions in 2 to enter the programtype selection mode.Press the NAME.S button for at least two seconds.The station will be registered as a program type, allowing it tobe the target of frequency seeks just as RDS stations are.Press the PTY button to end the program type selection mode.54321Registration of a station as a PTY3 above.Switching to Other Stations with the Same Type of Program:When "PTY" is blinking in the display, perform auto seektuning.The tuner scans for another station with the same type ofprogram.Canceling Program Type Function During Its Operation:Press the 38(PTY) button.Confirming Program Type:Press the DISP button.The program type of the station currently tuned to will bedisplayed for two seconds. During that time, "E" will blink inthe display.If you tune to frequencies for which no program type has beenstored, "No Entry" will be displayed.NOTE— 21 —