Press the DISP button for at least three seconds.The security code will be set."RE-ENTER" will appear in the display for one second, askingyou to enter the code once again for confirmation. When"CODE" appears in the display, you can start inputting thecode.Press the Preset button and input the security code again.Press the DISP button again for at least three seconds."APPROVED" will appear in the display, with the security codefunction turning on. From this point on, if the unit isdisconnected from the battery, the security code must beentered the first time that the unit's power is turned on."ENTER" and "CODE" will appear in the display, asking you toinput the code.If you input an incorrect security code, the code setting modewill be canceled automatically. Follow the steps from 5 to 9above again.If you press the RESET button or remove the battery:The first time you turn the unit on again, "CODE" will appear inthe display, asking you to input the security code.Repeat steps 8 and 9 above, and input the security code.You can start operating the unit again when "APPROVED"appears in the display.If you enter the incorrect code, the power will turn off. Enterthe correct code to turn the unit on.NOTE987Step Button to press # Timespressed Display1 #1 436#22#3 24 #4 1“3”“5”“1”“0”When the battery is removed from the unit's power switch, youcannot turn on the unit again unless the preset security code isinput. This function helps prevent theft.You must follow steps 1 to 9 to be able to use the Security Codefunction. Turning off the power during the procedure willdeactivate the security code setting.Once the security code function has been activated, "Security"disappears from the MENU system. Note that it will no longer bepossible to cancel this function afterwards.Press the SRC button repeatedly to select the standby mode."ALL OFF" is displayed when the standby mode is selected.Select the four digits to use in your security code.The four-digit security code is very important, as you will need itto turn the unit on again when the code security function is on.Choose the number carefully and do not forget it (write it downand keep it separately in a safe place).Press the MENU button for at least one second."MENU" is displayed and the menu mode is turned on.Keep pressing the FM button until the "Security" appears in thedisplay.Press the AM button to search in the other direction.Press either the 4 or ¢ button for at least two seconds."ENTER" will appear in the display for one second, indicatingthe code setting mode has been entered. When "CODE"appears in the display, you can start inputting the code.Press the preset button and enter the security code that youhave selected in step 2.Example: Use "3510" as the security code.6543NOTE21NOTESecurity CodeMenu settings— 34 —English