You can set the date formats of the calendar function.Display and setting:Select the display "Date Mode" during the selecting function inthe menu system.Press the 4 and ¢ button to select the date format youwant to show in the display.The sample of the date format for today is displayed.21Calendar ModeAdjust the date for the unit so that you can use the calendarfunction.Display and setting:Select the display "Date Adjust" during the selecting function inthe menu system.Press either the 4 or ¢ button for at least two seconds toenter the Calendar adjustment mode.The date display will blink.Selecting the item (day, month, or year) to adjustPress the 4 or ¢ button.The item blinking in the display can be adjusted.Adjusting the datePress the FM or AM buttonThe item of the date blinking in the display will change.Press the MENU button to end the menu mode.54321Calendar AdjustmentAdjust the time manually.(KDC-X715 only)This adjustment is available only when the automatic timeadjustment is set to off. (page32)Display and setting:Select the display "Clock Adjust" during the selecting functionin the menu system.Press either the 4 or ¢ button for at least two seconds toenter the Manual time adjustment mode.The time display will blink.• Adjusting the hoursPress the FM button to advance the hours, or press the AMbutton to make the hours go back.• Adjusting the minutesPress the ¢ button to advance the minutes, or press the4 button to make the minutes go back.Press the MENU button to end the menu mode.4321NOTEManual Time AdjustmentThis function produces a beep sound that accompanies buttonoperation. It can be switched on or off.Display and setting:"Beep ON" : Beep setting is on."Beep OFF" : Beep setting is off.The beep sound is not output from the preout jacks.NOTETouch Sensor Tone— 31 —