Kenwood KDC-8023 Instruction Manual

Also see for KDC-8023: Service manual Service manual

Make sure that the unit is installed securely in place. If the unit isunstable, it may malfunction (for example, the sound may skip).Bend the tabs of themounting sleeve witha screwdriver or similarutensil and attach it inplace.Metal mounting strap(commerciallyavailable)Phillips truss headsheet metal screw(commercially available)Firewall or metal supportScrew (M4X8)(commerciallyavailable)• To attach this unit, make sure the front of the control panel facesyou and fit it into the mounting sleeve by pressing the four cornersof the hard rubber frame at the same time.Do not apply strong pressure to other sections than the corners;otherwise troubles such as the impossibility of opening or closingthe panel may result.• The hollow at the center of the rubber frame is designed to make iteasier to remove discs.If you do not want the hollow to be visible, mount the rubber framein the opposite direction (with the flat side at the top instead of thebottom).Installation (non-Japanese cars)English— 36 —