Kenwood KDC-8026 Instruction Manual

Also see for KDC-8026: Service manual

Kenwood KDC-8026 Instruction Manual Manual pdf 14 page image

14 | EnglishGeneral featuresIn External disc, or Auxiliary input sourceDual Zone SystemMakes the sound different for the front channeland rear channel.Output the Internal source sound from either oneof the front or rear channels, and the sound ofother source from the Dual zone channel.1 Select the sourcePress the [SRC] button.Select the source sound to be output from theDual zone channel.2 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "2-ZN" isdisplayed above the [5] button.Refer to 'Notes on Multi-function Key System'(page 9).3 Enter the Dual Zone System Control modePress the [5] ("2-ZN") button.4 Select the item for adjustmentPress the desired [2] — [3] button.Each time the button is pressed the items thatcan be adjusted switch as shown below.Adjustment Item Button Display RangeDual Zone System [2] "ON"/"OFF" ON/OFFDual Zone SystemFront & Rear[3] "F – R" Front/RearDual Zone System Rear:The front is this unit’s internal source, and the rear isselected source sound.Dual Zone System Front:The rear is this unit’s internal source, and the front isselected source sound.5 Exit the Dual Zone System Control modePress the [6] button.6 Select the sourcePress the [SRC] button.Select the source sound to be output from theinternal source channel.• The Dual Zone System can be used with the sourcesshown below.- Internal auxiliary input- KCA-S210A- CA-C1AX- External disc changer/ player• While Dual Zone System is ON, the setting of DualZone System Front or Rear is disabled.Set Dual Zone System Front or Rear first, and then setthe Dual Zone System to ON.• When the Dual Zone System is ON, there is no Dualzone channel audio control or other effect.• When you use the Dual Zone System by selecting theoptional accessory source for the output of the Dualzone channel, you cannot select another optionalaccessory source as the source for the Internal sourcechannel.• When you set the Dual zone system to ON while thesub woofer preout is switched ON, the sound of thesub woofer preout isn’t output.• The Dual Zone System cannot be used if a DABcontrol unit is connected.• When the source is selected to VZ-7000P/N (optionalaccessory), the VZ-7000P/N’s sound is not output if theDual Zone System is turned ON.Display Mode SwitchingSwitching the display mode.1 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "DISP" isdisplayed above the [3] button.Refer to 'Notes on Multi-function Key System'(page 9).2 Enter display control modePress the [3] ("DISP") button.3 Select the display modePress the [2] ("MODE") button.Each time the button is pressed the displaymode switches as shown below.Display Display Mode"Display C" Demonstration."Display A" Normal display type."Display B" Silent display type.4 Exit display control modePress the [6] button.