Kenwood KDC-8026 Instruction Manual

Also see for KDC-8026: Service manual

Kenwood KDC-8026 Instruction Manual Manual pdf 19 page image

English | 19Canceling Direct Access TuningPress the [DIRECT] button on the remote.Station Preset MemoryPutting the station in the memory.1 Select the bandPress the [FM] or [AM] button.2 Select the frequency to put in the memoryPress the [4] or [¢] button.3 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until the functionitem is not displayed above the [2] — [5] button.Refer to 'Notes on Multi-function Key System'(page 9).4 Put the frequency in the memoryPress the desired [1] — [6] button for at least2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in thememory on each [1] — [6] button.Auto Memory EntryPutting stations with good reception in thememory automatically.1 Select the band for Auto Memory EntryPress the [FM] or [AM] button.2 Open Auto Memory EntryPress the [AME] button for at least 2 seconds.When 6 stations that can be received are put inthe memory Auto Memory Entry closes.Preset TuningCalling up the stations in the memory.1 Select the bandPress the [FM] or [AM] button.2 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until the functionitem is not displayed above the [2] — [5] button.Refer to 'Notes on Multi-function Key System'(page 9).3 Call up the stationPress the desired [1] — [6] button.Frequency Step SettingChanging the tuning frequency step.The original setting is FM band 50 kHz, and AMband 9 kHz.While pressing the [1] and [5] button, pressthe Reset button.The frequency step changes to FM band 200 kHz,and AM band 10 kHz.• When the same operation is repeated, it returns to theoriginal setting.• When the frequency step is switched, the frequenciesin the memory are deleted.Function of LX BUS TelevisionTV TuningThe TV channel of a connected LX BUS Television(optional accessory) can be selected.The action depends on the setting of theconnected LX BUS Television. Refer to the userinstruction of the LX BUS Television for details.1 Select TV sourcePress the [SRC] button.Select the "TV" display.2 Select the TV band and Video inputPress the [FM] button.Each time the [FM] button is pressed TV bandsand Video input switch.3 Select the TV channelPress the [4] or [¢] button.Function of LX BUS TelevisionPreset TV TuningCalling up the TV channels in the memory.1 Select the TV bandPress the [FM] button.2 Call up the TV channelPress the desired [1] — [6] button.