Kenwood KDC-8026 Instruction Manual

Also see for KDC-8026: Service manual

Kenwood KDC-8026 Instruction Manual Manual pdf 27 page image

English | 27In Standby modeBuilt-in Amp Mute SettingToggles ON or OFF the mute control on the built-in amplifier.Turning ON this control enhances the preoutquality.Display Setting"AMP Mute OFF" The built-in amplifier activates."AMP Mute ON" The built-in amplifier deactivates.B.M.S. (Bass Management System)Adjust the bass boost level of the externalamplifier using the main unit.Display Setting"AMP Bass FLT" Bass boost level is flat."AMP Bass +6" Bass boost level is low (+6dB)."AMP Bass +12" Bass boost level is mid (+12dB)."AMP Bass +18" Bass boost level is high (+18dB).• Refer to the catalog or instruction manual for poweramplifiers that can be controlled from this unit.• For amplifiers there are the model that can be setfrom Flat to +18 dB, and the model that can be setfrom Flat to +12 dB.When an amplifier that can only be set to +12 isconnected to the unit, "AMP Bass +18" won’t workcorrectly even if it’s selected.B.M.S. Frequency OffsetSetting the central frequency boosted by B.M.S.Display Setting"AMP Freq NML" Boost with the normal central frequency."AMP Freq Low" Drop the normal central frequency 20%.In FM receptionCRSC (Clean Reception SystemCircuit)Temporarily have reception switched fromstereo to mono to reduce multi-path noise whenlistening to the FM station.Display Setting"CRSC ON" The CRSC is ON."CRSC OFF" The CRSC is OFF.• Strong electrical fields (such as from power lines) maycause unstable sound quality when CRSC is turnedON. In such a situation, turn it OFF.Text ScrollSetting the displayed text scroll.Display Setting"Scroll Auto" Repeats scroll."Scroll MANU" Scrolls when the display changes.• The text scrolled is shown below.- CD text- Folder name/ File name/ Song title/ Artist name/Album name- MD titleBuilt-in Auxiliary input SettingSet the Built-in Auxiliary Input function.Display Setting"AUX OFF" When selecting the source there’s no Auxiliary Input."AUX ON" When selecting the source there’s Auxiliary Input.In Standby modeCD Read SettingWhen there is a problem on playing a CD withspecial format, this setting play the CD by force.Display Setting"CD READ 1" Play CD and MP3/WMA."CD READ 2" Play CD by force.• Setting "CD READ 2" cannot play MP3/WMA.Some music CDs may not be played back even in the"CD READ 2" mode.