Kenwood KDC-BT41U Instruction Manual

Also see for KDC-4751SD: Service manual

Contents

Kenwood KDC-BT41U Instruction Manual Manual pdf 30 page image

30 EnglishSTEERING WHEELREMOTE INPUTMUTEANT. CONTP.CONTREMOTE CONTLR1234567812345678Antenna CordFM/AM antennainput (JASO)Pin Color and function Pin Color and functionA4 Yellow Battery B1 / B2 Purple ª / Purple/black · Rear speaker (right)A5 Blue/White Power control B3 / B4 Gray ª / Gray/black · Front speaker (right)A7 Red Ignition (ACC) B5 / B6 White ª / White/black · Front speaker (left)A8 Black Earth (ground) connection B7 / B8 Green ª / Green/black · Rear speaker (left)Rear output/ Sub Woofer outputswitchable (page 7)Microphone (KCA-MC10 ;optional accessory)(KDC-BT41U only)Light Blue/Yellow(Steering remotecontrol wire)Brown(Mute control wire)Blue/White(Power control/Antenna control wire)Red (A–7 Pin)Yellow (A–4 Pin)Yellow (Battery wire)Yellow (Battery wire) Yellow (A–4 Pin)VehicleUnitDefault wiringRed (Ignition wire)Red (Ignition wire) Red (A–7 Pin)To use the steering wheel remote control feature,you need to an exclusive remote adapter (notsupplied) matches your car is required.To connect the Kenwood navigation system, consultyour navigation manual.(Connect to the terminal that is grounded wheneither the telephone rings or during conversation.KDC-4751SD only)Connect either to the power control terminal whenusing the optional power amplifier, or to the antennacontrol terminal in the vehicle.If no connections are made, do not let the wire come out from thetab.Wiringharness DFuse (10A)Connecting the ISO connectors on some VW/Audi orOpel (Vauxhall) automobilesYou may need to modify the wiring of the suppliedwiring harness as illustrated below.Wiring connectionConnector AConnector BUSB connectorAUX input (Stereo)Use the mini-plug (3.5 mm ø) cablewhich is stereo type and does not haveany resistance.