Kenwood KDC-BT41U Instruction Manual

Also see for KDC-4751SD: Service manual

Contents

Kenwood KDC-BT41U Instruction Manual Manual pdf 8 page image

8 EnglishListening to the Radio1 Press SRC to select “TUNER”.2 Press BAND repeatedly to select a band (FM1, FM2, FM3, MW/LW).3 Press 4 / ¢ to search for a station.Adjust [SETTINGS] mode settingsWhile listening to the radio...1 Press the volume knob to enter [FUNCTION] mode.2 Turn the volume knob to select [SETTINGS], then press to enter.3 Turn the volume knob to make a selection, then press to confirm.See table below for selection.4 Hold to finish the procedure.Item Selectable setting (Preset: *)LOCAL SEEK ON: Searches only FM stations with good reception. ; OFF *: Cancels.SEEK MODE Selects the tuning mode for 4 / ¢ buttons.AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset memory. ;MANUAL: Manually search for a station.AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO *: Cancels (automatic memorizing isnot activated). (Selectable only if [NORMAL/ NORM] is selected for [PRESET TYPE].) (page 7)MONO SET ON: Improves the FM reception (but the stereo effect may be lost). ; OFF *: Cancels (stereo effect resumes).PTY SEARCH Selects the available Program Type (page 9). Then, press 4 / ¢ to start searching.Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language(ENGLISH */ FRENCH/ GERMAN), then press to confirm.NEWS SET 00M – 90M: Sets the time for receiving the next news bulletin. ; OFF *: Cancels.AF SET ON *: Automatically searches for another station broadcasting the same program in the same Radio Data Systemnetwork with better reception when the current reception is poor. ; OFF: Cancels.REGIONAL ON *: Switches to another station only in the specific region using the “AF” control. ; OFF: Cancels.■ Hold for about 2 seconds to memorize the current station or the selected ProgramType. (Refer to [PTY SEARCH] on the table below to select the Program Type.)■ Press briefly to recall memorized station (or Program Type after entering the PTYsearch mode).Hold to turn on or off the Traffic Information function (not applicable if “MW/LW” is selected).