Kenwood KDC-BT41U Instruction Manual

Also see for KDC-4751SD: Service manual

Contents

Kenwood KDC-BT41U Instruction Manual Manual pdf 7 page image

English 7Initial settings before operations1 Press SRC to enter [STANDBY] mode.2 Press the volume knob to enter [FUNCTION] mode.3 Turn the volume knob to select [INITIAL SET], then press to enter.4 Turn the volume knob to make a selection, then press to confirm.See table below for selection.5 Hold to finish the procedure.Item Selectable setting (Preset: *)PRESET TYPE NORMAL/ NORM *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW). ;MIX: Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ MW/ LW).KEY BEEP ON */ OFF: Activates/deactivates the keypress tone.RUSSIAN SET ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ;OFF *: Cancels.P-OFF WAIT Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery.––– : Cancels ; 20M *: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutesBUILT-IN AUX/BUILTIN AUXON1 *: Outputs sound of the connected external component through the car speakers when “AUX” is selected asthe source. ; ON2: Outputs sound from the connected external component when “AUX” is selected as the source.When you turn on the power, the sound attenuates (to prevent noise when no external component is connected).Turn the volume knob clockwise to return to the previous volume level. ; OFF: Disables “AUX” in source selection.CD READ 1*: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD. No soundcan be heard if an audio file disc is played.SWITCH PREOUT/SWITCH PREREAR */ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on therear of the unit (through an external amplifier).SP SELECT OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance.F/W UP xx.xx YES: Starts upgrading the firmware. ; NO *: Cancels (upgrading is not activated).For details on how to update the firmware, see: www.kenwood.com/cs/ce/