Kenwood KDC-BT530U Instruction Manual

Also see for KDC-BT430U: Quick start guide

Contents

ENGLISH 15BLUETOOTH®[PHONE BOOK] (Applicable only if the phone supports PBAP.)1 Turn the volume knob quickly to enter alphabet search mode (if thephonebook contains many contacts).The first menu (ABCDEFGHIJK) appears.• To go to the other menu (LMNOPQRSTUV or WXYZ1 ), press 2 /1 .• To select the desired first letter, turn the volume knob or pressS / T, then press the knob.Select “1” to search with numbers and select “ ” to search withsymbols.2 Turn the volume knob to select a name, then press the knob.3 Turn the volume knob to select a phone number, then press the knob tocall.• The phonebook of the connected phone is automatically transferred to theunit when pairing.• Contacts are categorized as: HM (home), OF (office), MO (mobile),OT (other), GE (general)• This unit can display only non-accent letters. (Accent letters such as “Ú”are shown as “U”.)[NUMBER DIAL] 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +).2 Press S / T to move the entry position.Repeat steps 1 and 2 until you finish entering the phone number.3 Press the volume knob to call.[VOICE] Speak the name of the contact you want to call or the voice command tocontrol the phone functions. (See “Make a call using voice recognition”.)[LOW]/[MID]/[FULL]: Shows the strength of the battery.*[NO SIGNAL]/[LOW]/[MID]/[MAX]: Shows the strength of the current received signal.** Functionality depends on the type of the phone used.Make a call using voice recognition1 Press and hold to activate the voice recognition of the connectedphone.2 Speak the name of the contact you want to call or the voice commandto control the phone functions.• Supported Voice Recognition features vary for each phone. Refer to theinstruction manual of the connected phone for details.Settings in memoryStore a contact in memoryYou can store up to 6 contacts into the number buttons (1 to 6).1 Press to enter Bluetooth mode.2 Turn the volume knob to select [CALL HISTORY], [PHONE BOOK] or[NUMBER DIAL], then press the knob.3 Turn the volume knob to select a contact or enter a phone number.If a contact is selected, press the volume knob to show the phonenumber.4 Press and hold one of the number buttons (1 to 6).“STORED” appears when the contact is stored.To erase a contact from the preset memory, select [NUMBER DIAL] in step 2and store a blank number.Make a call from memory1 Press to enter Bluetooth mode.2 Press one of the number buttons (1 to 6).3 Press the volume knob to call.“NO MEMORY” appears if there is no contact stored.