ENGLISH 23AUDIO SETTINGS• Before making an adjustment for [DISTANCE] and [GAIN] of [DTA SETTINGS],select the speaker you want to adjust:When 2-way crossover is selected:[FRONT LEFT]/[FRONT RIGHT]/[REAR LEFT]/[REAR RIGHT]/[SUBWOOFER]– You can only select [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] if a settingother than [NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE].(Page 21)When 3-way crossover is selected:[TWEETER LEFT]/[TWEETER RIGHT]/[MID LEFT]/[MID RIGHT]/[WOOFER]– You can only select [WOOFER] if a setting other than [NONE] is selected for[WOOFER] of [SPEAKER SIZE]. (Page 21)• [R-SP LOCATION] of [CAR SETTING] is selectable only if:– 2-way crossover is selected. (Page 5)– A setting other than [NONE] is selected for [REAR] of [SPEAKER SIZE].(Page 21)Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]If you specify the distance from the center of thecurrently set listening position to every speaker, thedelay time will be automatically computed and set.1 Determines the center of the currently setlistening position as the reference point.2 Measures the distances from the reference pointto the speakers.3 Calculates the differences between the distanceof the furthest speaker (rear speaker) and otherspeakers.4 Sets the [DISTANCE] calculated in step 3 forindividual speakers.5 Adjusts [GAIN] for individual speakers.Example: When [FRONT ALL] is selected as thelistening positionDISPLAY SETTINGS: Zone identification for color settings and brightness settings: Zone identification for brightness setting1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item (see the table on page 24),then press the knob.3 Repeat step 2 until the desired item is selected/activated or follow theinstructions stated on the selected item.4 Press and hold to exit.To return to the previous setting item, press .