Kenwood KDC-BT7539U Instruction Manual

Also see for KDC-BT7539U: Service manual

14 | KDC-BT7539UDial a number1 Enter dialing method modePress the [ATT] button for at least 1 second.2 Select the number dial modePress the Control knob.Select the “DIAL” display.3 Enter a phone numberPress the number ([1] – [0]), #([FM]), *([AM]), or+([¢]) button on the remote controller.4 Make a callPress the [DIRECT] button on the remotecontroller.To erase the entered phone number digit bydigit:Press the [4] button on the remote controller.⁄• You can input max 32 digits.Speed dialing (Preset dial)1 Enter dialing method modePress the [ATT] button for at least 1 second.2 Press the Control knob.Select the "DIAL", "P-BOOK", "OUT-CALL", "IN-CALL", or"MIS-CALL" display.3 Enter preset dial modePress the [FNC] button.4 Select the number you want to recall from thememoryTurn the Control knob or push it towards leftor right.Calling a number in the Phone Book1 Enter dialing method modePress the [ATT] button for at least 1 second.2 Select the Phone Book modePress the Control knob.Select the "INITIAL" display, proceed to step 3.Select the "P-BOOK" display, proceed to step 4.3 Select the initial to be searched forOperation type OperationMove to the next character. Push the Control knob towards rightor left.Move to the next row. Push the Control knob towards up ordown.Determine the selected initial. Press the Control knob for at least 1second.4 Select the nameOperation type OperationMove to the next phonenumber.Turn the Control knob or push ittowards up or down.Move to the next name. Push the Control knob towards rightor left.5 Make a callPress the Control knob for at least 1 second.⁄• During search, a non-accent character such as "u" issearched for instead of an accent character such as "ü".The non-alphabetical caracters such as Chinese andRussian are classified as symbol.Making a call1 Enter dialing method modePress the [ATT] button for at least 1 second.2 Select a dialing methodPress the Control knob."DIAL" » "INITIAL" » "P-BOOK" » "OUT-CALL" » "IN-CALL" » "MIS-CALL"Methods of operations in the above modes aredescribed below.3 Exit the dialing method modePress the [ATT] button for at least 1 second.5 Press the Control knob.6 Press the [FNC] button.7 Make a callPress the Control knob for at least 1 second.⁄• You need to register the preset dial number. (page 15)Operation of hands-free phoning