English | 15Make a voice dialing call1 Enter voice recognize modeSelect “BT” > “V-REC”.For how to select Function Control item, refer to (page 6).“Ready” is displayed.2 Press the Control knob.“PB Name?” is displayed.When a beep is heard, utter the name within 2seconds.3 “PN Type?” is displayed.When a beep is heard, utter the category within 2seconds.4 Make a callPress the Control knob for at least 1 second.• This step is the same as step 3 of the procedure in. You can make acall or select a category.⁄• If your voice cannot be recognized, a message isdisplayed. Pressing the Control knob allows you to retryvoice input. (page 39)• Both the name and category requires registration of avoice tag. (page 25)• Audio sound is not output during voice recognize.Registering to the Preset Dial NumberList1 Enter the phone number you wish to registerEnter the phone number with reference to thefollowing:Dial a number/ Calling a number in the call log/Calling a number in the Phone Book2 Enter Preset Memory modePress the [FNC] button.3 Select the number to put in the memoryTurn the Control knob or push it towards leftor right.4 Determine the number to put in the memoryPress the Control knob for at least 1 second.Exit the Preset Memory modePress the [FNC] button.Display of phone number type(category)The category items in the Phone Book are displayedas follows:Display Information"General"/ General"Home"/ Home"Office"/ Office"Mobile"/ Mobile"Other"/ OtherCalling a number in the call log1 Enter dialing method modePress the [ATT] button for at least 1 second.2 Select the call log modePress the Control knob.Select the "OUT-CALL" (outgoing call), "IN-CALL"(incoming call), or "MIS-CALL" (missed call) display.3 Select a name or phone numberTurn the Control knob or push it towards up ordown.4 Make a callPress the Control knob for at least 1 second.⁄• The outgoing call list and the incoming call list, and themissed call list are the lists of calls originated from andreceived at this unit. They are not the ones stored in thecell-phone memory.