Kenwood KDC-BT7539U Instruction Manual

Also see for KDC-BT7539U: Service manual

8 | KDC-BT7539U1 Enter Function Control modePress the [FNC] button.Function icon is displayed.2 Select your desired setup itemOperation type OperationMovement between items Turn the Control knob.Selection of item Press the Control knob.Return to previous item Press the [FNC] button or “ ” icon.Repeat selection and determination until yourdesired setup item is selected.Example:MENU DISPDISPMENUTEXTTYPE3 Make a settingTurn the Control knob to select a setting value,and then press the Control knob.• The value of items with mark can be set bypushing the Control knob towards right or left.• Some items require you to keep pressing theControl knob for 1 or 2 seconds so that you canmake a setting. For these items, the time duringwhich you need to keep pressing the Controlknob is displayed in the Entry column in seconds.• For the functions accompanied by thedescription of the setting procedure and so forth,the reference page numbers are displayed.4 Exit Function Control modePress the [FNC] button for at least 1 second.Display SettingsFunction ControlAbout Display TypeShown below are examples of display types.Display Display Type Chinese display“TYPE [A]”1113113“TYPE [B]”11111“TYPE [C]”1123 123“TYPE [D]”11212“TYPE [E]” 4 4“TYPE [F]”6161“TYPE [G]” 5 5• To select the Chinese display type, select “ON” in “MENU”> “Chinese” of (page 6).⁄• 1 Text display part2 Status display3 Icon display part4 Spectrum Analyzer display5 Clock display6 Display (varied depending on the source)