Kenwood KDC-BT952HD Instruction Manual

Also see for KDC-BT952HD: Quick start guide

25 | KDC-X996/ KDC-BT952HD English | 26HD Radio™ Tuner OperationFunction of remote controlDirect Access TuningTuning in a desired radio station by entering thefrequency.1 Select the radio band2 Enter Direct Access Tuning modePress the [DIRECT] button.“– – – –” is displayed.3 Select Tuning itemPress the [DIRECT] button.Pressing the [DIRECT] button each time switchesthe following tuning items as follows.Items DisplayFrequency “– – – –”Channel (FM only) “HD –”Cancelling Direct Access Tuning —4 Enter the frequency or ChannelPress the number buttons.Example of frequency input:Desired frequency Press button92.1 MHz (FM) [9], [2], [1]810 kHz (AM) [8], [1], [0]5 Tune in to the entered frequency or ChannelPress the [4] or [¢] button.iTunes TaggingYou can stores the tag of the information about thesong being received, and send it to the connectediPod. You can easily find the song on the iTunesStore according to the tag sent to the iPod.1 Store the song information tagPress the [PRESET] button for at least 1 second.“ TAG ” will be indicated on the display when songinformation can be registered.“TAG Storing” is indicated on the display while a tagis being stored in this unit. “TAG Stored” is indicatedon the display after the tag has been stored.When your iPod is connected to this unit, “TAGTransferred” is indicated on the display and the tagis sent to the iPod.⁄• The song corresponding to the tag sent to the iPod isindicated in the playlist of the synchronized iTunes.• By clicking your desired song in the playlist, you caneasily find it on the iTunes Store and buy it from theiTunes Store.• A total of fifty song information tags can be stored inthis unit including the song information tags storedby the SiriusXM tuner function mentioned in tagging> (page 72). When a tag has been sent to theiPod, the tag stored in this unit is cleared.• Select “ON” for “Tagging” as mentioned in Setting> (page 24) when using this function.• The memory usage can be checked by selecting the“TAG Memory” setting mentioned in Setting> (page 24).