57 | KDC-X996/ KDC-BT952HD English | 58Bluetooth SetupRegistering Bluetooth Device(Pairing)To make your Bluetooth device usable with thisunit, you need to register it (pairing). You canregister up to 5 Bluetooth devices to this unit.Registering from Bluetooth devices1 Turn on this unitPress the [SRC] button.2 Start registering this unit by operating theBluetooth deviceBy operating the Bluetooth device, register thehands-free unit (pairing). Select “KENWOOD BTCD/R-6P1” from the list of connected units.3 Enter a PIN codeInput the PIN code (“0000”) in the Bluetoothdevice.Check that registration is complete on theBluetooth device.✍ PIN code is set to “0000” as the default. You canchange this code. Refer to Code> (page 58).4 By operating the Bluetooth device, start hands-free connection.Registering from this unit1 Enter Bluetooth modePress the [ ] button.✍ You can also select from “Settings” in Menu Listmode.2 Enter Bluetooth device registration modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “BT Settings” > “Pairing” > “DeviceRegist.”.Search for the Bluetooth device.When search is completed, “Finished” is displayed.3 Select a Bluetooth deviceTurn the [VOL] knob and press it when thedesired item is displayed.4 Input the PIN code1. Turn the [VOL] knob and press it when thedesired item is displayed.Select the digit.2. Turn the [VOL] knob to select the numbers,and then press the [VOL] knob.5 Transmit the PIN codePress the [VOL] knob for at least 1 second.If “Pairing Success” is displayed, registration iscompleted.✍ If the error message appears even though thePIN code is correct, try Bluetooth device>.6 Return to the device listPress the [MENU] button.7 Exit BT Settings modePress the [ ] button.⁄• This unit allows up to eight digits to be input for a PINcode. If a PIN code cannot be input from this unit, it canbe input from the Bluetooth device.• If there are 5 or more Bluetooth devices registered, youcannot register a new Bluetooth device.Registering Special Bluetooth deviceAllow registration of a special device that cannot beregistered normally (pairing).1. Select Special device registration modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “BT Settings” > “Pairing” > “SPCL DVCSelect”.2. Enter Special device registration modePress the [VOL] knob.A list is displayed.3. Select a device nameTurn the [VOL] knob and push the center whenthe desired device name is displayed.If “Completed” is displayed, registration iscompleted.4. Go through the procedure step 3 of and completethe registration (pairing).Cancelling Special device registration modePress the [MENU] button for at least 1 second.⁄• If the device name is not in the list, select “Other Phones”.Selecting the Bluetooth device YouWish to ConnectWhen two or more Bluetooth devices have alreadybeen registered, you need to select the Bluetoothdevice you wish to use.1 Enter Bluetooth modePress the [ ] button.✍ You can also select from “Settings” in Menu Listmode.2 Select Bluetooth device selection modeTurn the [VOL] knob and press it when thedesired item is displayed.Cell-phoneSelect “BT Settings” > “Pairing” > “PhoneSelection”.Audio playerSelect “BT Settings” > “Pairing” > “AudioSelection”.3 Enter Bluetooth device selection modePress the [VOL] knob.“(name)” is displayed.4 Select the Bluetooth deviceTurn the [VOL] knob.5 Set up the Bluetooth devicePress the [VOL] knob.“✱(name)” or “-(name)” is displayed.“✱”: The selected Bluetooth device is busy.“-”: The selected Bluetooth device is on standby.“ “ (blank): The Bluetooth device is deselected.6 Exit BT Settings modePress the [ ] button.⁄• If a Bluetooth device is already selected, deselect it, andthen select a different one.Registering PIN CodeBy operating the Bluetooth device, specify the PINcode necessary for registering this unit.1 Enter Bluetooth modePress the [ ] button.✍ You can also select from “Settings” in Menu Listmode.2 Enter PIN code edit modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “BT Settings” > “Detailed Setup” > “PINCode Edit”.The current setting of PIN code is displayed.3 Input the PIN code1. Turn the [VOL] knob and press it when thedesired item is displayed.Select the digit.2. Turn the [VOL] knob to select the numbers,and then press the [VOL] knob.4 Register a PIN codePress the [VOL] knob for at least 1 second.If “Completed” is displayed, registration iscompleted.5 Exit BT Settings modePress the [ ] button.⁄• By default, “0000” is specified.• A PIN code can be specified with up to eight digits.
