Kenwood KDC KDC-V6017 Instruction Manual

Also see for KDC-516S: Service manual

Kenwood KDC KDC-V6017 Instruction Manual Manual pdf 24 page image

(except for KDC-C560) are connected, you can directly inputletters using the number/letter entry buttons on the remote.Example: Use the following table to enter the name "DANCE".Continue steps 3 and 4 until all the characters are chosen forthe name.You can enter up to 12 characters for each name.Press either the NAME.S button on the main unit or the OKbutton on the remote.The disc name is stored and the disc name preset mode iscanceled.If you make no entry in a 10-second period, the name will bestored with the characters input so far.• The number of discs whose names can be stored will differdepending on the disc changer that is connected. Please seeyour disc changer manual for details.Up to 30 CDs can be registered with this unit.• Discs are identified by their total length and number of tracks. Ifanother disc happens to have the same specifications as onethat you have already stored a name for, the name will bedisplayed for it, too.• If you want to change the name of a disc, repeat steps 1 and 2to display the name, and then repeat steps 3 and 4 to input thechanges.• Pressing the reset button erases the disc names stored in thisunit, but does not erase the names stored in a disc changer.NOTE6NOTE5Button to press # Times pressedCharacter#3 11#2#6 2#2 3#3 2“D”“A”“N”“C”“E”Store the names of discs to be displayed when played.Play the disc whose name you want to preset.• This function is not available for disc changers that do notfeature the Disc Name Preset function.• The Disc Name Preset function cannot be used during theMagazine random play as well as while a disc title or track titleis displayed.Press the NAME.S button for at least two seconds."NAME SET" is displayed and the disc name preset mode isentered.The cursor blinks in the position where character input can bemade.Press either the 4 or ¢ button to move the cursor to thedesired position.The 4 button moves the cursor to the left, and the ¢button to the right.You can also move the cursor left or right by pressing the 4or ¢ buttons, respectively, on the remote.Each press of the 38 button results in the type of charactersthat are to be entered changing between alphabet andnumerals/symbols.Press the FM or AM button to display the desired character.Characters that can be displayed are as follows.Direct Alphabet Input(Function of remote with number/letter entry buttons)If the disc changers that were manufactured and sold after 1997NOTEAlphabet (upper case): A ~ ZAlphabet (lower case): a ~ zNumerals and symbols: 0~9 @ ” ‘ ` % & ∗ + - = , . / \ < > [ ]Special characters: á à é è í ì ó ò ú ù Ñ Ç ® ß ‹ fl â ä êë î ï ô ö û ü ñ ç © Æ › fi432NOTE1Presetting Disc Names (DNPS)CD/External disc control features— 24 —English