You can dim the display.The dimmer function is not available for units if the dimmer wireis not connected.Display and setting:"Dimmer ON" : The dimmer setting is on. (Default setting)"Dimmer OFF" : The dimmer setting is off.NOTEDimmerThis adjustment permits easy viewing of the display.Display and setting:"Contrast 0" – "Contrast 10"The initial setting value is "5".NOTEContrast Adjustmentblue adjust mode.The 4 and ¢ buttons are used to adjust the blue colortones, respectively.Press the #3 button to end the blue adjust mode.To store the color setting in the memory:(color preset memory)After adjusting the illumination colors, press the #5 button fortwo seconds to store the color setting in the memory.Pressing the #5 button again recalls the stored colors from thememory.The Blue Adjust mode setting cannot be stored in memory.Press the MENU button to end the Variable Illumination ColorSetting mode.7NOTE6Function of the KDC-V6017You can set the display to a desired color.Display and setting:Select the display "Color" during the selecting function in themenu mode.To set a color manually:Hold down on the 4 or ¢ button.Pressing the ¢ button advances the color, and pressing the4 button reverses it.When the desirable color appears, release the button.To make the popular colors appear:Press the preset button (#1-4) for the desired color.The buttons #1-4 is preset for the following four colors:#1: White#2: Red#3: Blue#4: Blue GreenTo switch colors depending on the situation:(Situational Mode)Each time you press the #6 button, the mode switches asfollows:When Situational Mode is off, the original color settingresumes.To finely adjust blue: (Blue Adjust Mode)Press the #3 button for at least two seconds to enter the5Scan ModeSRC Mode(Changing colors depending on the source being played)Time Mode(Color changes every six hours)Situational Mode off4321Variable Illumination Color SettingMenu settings— 30 —English