Kenwood KDC-MP102U Instruction Manual

Contents

15ENGLISHFM tuner sectionFrequency range (50 kHz space):87.5 MHz — 108.0 MHzUsable sensitivity (S/N= 26 dB):11.2 dBf (1.0 μV/75 Ω)Quieting sensitivity (DIN S/N = 46 dB):19.2 dBf (2.5 μV/75 Ω)Frequency response (±3 dB): 30 Hz — 15 kHzSignal-to-Noise ratio (MONO): 63 dBStereo separation (1 kHz): 40 dBAM tuner sectionFrequency range (10 kHz space):530 kHz — 1 700 kHzUsable sensitivity (S/N= 20 dB): 31 dBμ (36 μV)CD player sectionLaser diode: GaAIAsDigital filter (D/A): 8 Times Over SamplingD/A converter: 24 BitSpindle speed: 500 rpm — 200 rpm (CLV)Wow & Flutter: Below Measurable LimitFrequency response (±1 dB): 20 Hz — 20 kHzTotal harmonic distortion (1 kHz): 0.01 %Signal-to-Noise ratio (1 kHz): 105 dBDynamic range: 90 dBMP3 decode: Compliant with MPEG-1/2 AudioLayer-3WMA decode: Compliant with WindowsMedia AudioUSB interfaceUSB standard: USB1.1/ 2.0 (Full speed)Maximum supply current: DC 5 V 1 AFile system: FAT16/ 32MP3 decode: Compliant with MPEG-1/2 AudioLayer-3WMA decode: Compliant with WindowsMedia AudioAudio sectionMaximum output power: 50 W × 4Full bandwidth power (at less than 1 % THD):22 W × 4Speaker impedance: 4 Ω — 8 ΩTone action: Bass: 100 Hz ±8 dBMiddle: 1 kHz ±8 dBTreble: 12.5 kHz ±8 dBPreout level / load (CD): 2 500 mV/10 kΩPreout impedance: ≤ 600 ΩAuxiliary input sectionFrequency response (±3 dB): 20 Hz — 20 kHzInput maximum voltage: 1 200 mVInput impedance: 10 kΩGeneralOperating voltage (11 V — 16 V allowable): 14.4 VMaximum current consumption: 10 AInstallation size (W × H × D):182 mm × 53 mm × 158 mm(7-3/16" × 2-1/8" × 6-1/4")Weight: 2.9 lbs (1.3 kg)SpecificationsAbout “KENWOOD Music Editor”This unit supports the PC application “KENWOOD MusicEditor Light ver1.1” or later.When you use the audio file with database informationadded by the “KENWOOD Music Editor Light ver1.1,”you can search a file by title, album or artist name usingMusic Search.In the Instruction manual, the term “USB device” isused to mean the device that contains audio files withdatabase information added with KENWOOD MusicEditor.“KENWOOD Music Editor Light ver1.1” is available fromthe following web site: www.kenwood.com/cs/ce/For further information on “KENWOOD Music EditorLight ver1.1,” refer to the site above or the applicationhelp.About Audio filePlayable Audio file: MP3 (.mp3), WMA (.wma)Playable disc media: CD-R/RW/ROMPlayable disc file format: ISO 9660 Level 1/2, Joliet,Romeo, Long file name.Playable USB device file system: FAT16, FAT32Although the audio files are complied with the standardslisted above, the play maybe impossible depending on thetypes or conditions of media or device.Subject to change without notice.