You can choose from three tuning modes: auto seek, presetstation seek, and manual. The "AUTO 1" indicator lights upwhen auto seek tuning is selected, and the "AUTO 2" indicatorlights when preset station seek tuning is selected.Display and setting:"Auto 1" : Auto seek tuning mode (Default setting)"Auto 2" : Preset station seek tuning mode"Manual" : Manual tuning modeSelecting Tuning Mode With the local seek function turned on, auto seek tuning skipsstations with relatively poor reception.Display and setting:"Local.S ON" : The local seek function is on."Local.S OFF" : The local seek function is off. (Default setting)Local Seek Function Display and setting:"News OFF" (Default setting) , "News 00min" - "News 90min"(min= minutes): When you select the news interruption timeout interval, theNews function turns on and the NEWS indicator lights up.When a news bulletin is received, "News" will be displayedand reception will begin at the preset volume.• If you choose the "20 min " setting, further news bulletins will notbe received for 20 minutes once the first news bulletin isreceived.• This function is only available if the desired station sends PTY-code for news bulletin or belongs to Network>-Network sending PTY-code for news bulletin.• If you turn on the news bulletin function in the MW/LW band,the band is switched automatically to the FM band.However, the MW/LW band is not returned to when you turnoff the function.NOTE— 35 —