Kenwood KDC-MP6090R Instruction Manual

Also see for KDC-MP6090R: Service manual

English— 40 —Connecting Cables to TerminalsTEL MUTEEXT.CONT.P.CONT.OUTANT.CONT.1234567812345678REAR FRONTFront left output (White)Front right output (Red)Rear right output (Red)Rear left output (White)Connector Function GuidePin Numbers forISO Connectors Cable Colour FunctionsExternal PowerConnectorA–4A–5A–6A–7A–8SpeakerConnectorB–1B–2B–3B–4B–5B–6B–7B–8YellowBlue/WhiteOrange/WhiteRedBlackPurplePurple/BlackGrayGray/BlackWhiteWhite/BlackGreenGreen/BlackBatteryPower ControlDimmerIgnition (ACC)Earth (Ground)ConnectionRear Right (+)Rear Right (–)Front Right (+)Front Right (–)Front Left ( +)Front Left ( –)Rear Left (+)Rear Left (–)Battery cable (Yellow)Ignition cable (Red)FM/AMantenna inputAntenna Cord (ISO)Antenna Conversion Adaptor (ISO–JASO) (Accessory3)Wiring harness(Accessory1)If no connections aremade, do not let the cablecome out from the tab.NOTEConnect to the terminal that isgrounded when either the telephonerings or during conversation.Power control/ Motor antennacontrol cable (Blue/White) Connect either to the power controlterminal when using the optionalpower amplifier, or to the antennacontrol terminal in the vehicle.A–7 Pin (Red)A–4 Pin (Yellow)Connector BFuse(10A)Connector ATEL mute cable (Brown)To connect the KENWOOD navigationsystem, consult your navigation manual.NOTEExternal amplifiercontrol cable(Pink / Black) To "EXT.AMP.CONT." terminal of theamplifier having the external ampcontrol function.To KENWOOD disc changer/DAB control input/KPA-SD100/KPA-HD100/KPA-SS100To connect these leads, refer to therelevant instruction manuals.NOTE