Kenwood KDC-MP732 Instruction Manual

Also see for KDC-MP732: Instruction manual Service manual

Contents

Kenwood KDC-MP732 Instruction Manual Manual pdf 45 page image

English | 45Other than Standby mode/When the Dual Zone System is ONDual Zone System SettingSetting the Front channel and Rear channelsound in the Dual Zone System.Display Setting"Zone 2 : Rear" Sub source (Auxiliary input source) is to be rearchannel."Zone 2 : Front" Sub source (Auxiliary input source) is to be frontchannel.G-Analyzer Stop WatchThe control of stop watch can be started by G-Analyzer function.• Do not use G-Analyzer stop watch on the Public roads.1 Select G-Analyzer Stop Watch modePush the Control knob towards [FM] or [AM].Select the "Stop Watch" display.2 Enter G-Analyzer Stop Watch modePress the Control knob for at least 1 second."Stop" is displayed.3 Enter Counter Ready modePress the Control knob."Ready" is displayed.4 Start CountWhen G in the vertical direction is detectedduring the travel, the count automatically starts."Running" is displayed.• You can also start the counter by pressing the Controlknob.5 Stop CountPress the Control knob."Stop" is displayed.• The control will start again when you accelerate orpress the Control knob.Do the operation after step3.When you Reset the Count(While "Stop" is displayed)Press the Control knob for at least 2 seconds.• You can reset of count when the count is stopped.6 Exit G-Analyzer Stop Watch modePress the [MENU] button.• When "Running" is displayed (counted), the count iscontinued even though G-Analyzer Stop Watch modeis finished. If you want to stop the count, enter themenu mode then press the control knob.• When Power off (ex; ACC OFF) while counting, thevalue of 1 second or less will be "00".