|
English | 5Notes• If you experience problems during installation,consult your Kenwood dealer.• When you purchase optional accessories, checkwith your Kenwood dealer to make sure that theywork with your model and in your area.• If the unit fails to operate properly, press the Resetbutton to restore factory settings.• Press the reset button if the disc auto changer failsto operate correctly. Normal operation should berestored.• We recommend the use of Code> (page 39) to prevent theft.• The characters conforming to ISO 8859-1character set can be displayed.• The RDS feature won’t work where the service isnot supported by any broadcasting station.• There are places in this manual where litindicators are described; however, the only timean indicator will light is in the following settings.When Indicator is selected as mentioned in Display Switching> (page 18).• The illustrations of the display and the panelappearing in this manual are examples used toexplain more clearly how the controls are used.Therefore, what appears on the display in theillustrations may differ from what appears on thedisplay on the actual equipment, and some of theillustrations on the display may be inapplicable.Cleaning the UnitIf the faceplate of this unit is stained, wipe it with adry soft cloth such as a silicon cloth.If the faceplate is stained badly, wipe the stain offwith a cloth moistened with neutral cleaner, thenwipe it again with a clean soft dry cloth.• Applying spray cleaner directly to the unit may affect itsmechanical parts. Wiping the faceplate with a hard clothor using a volatile liquid such as thinner or alcohol mayscratch the surface or erases characters.Cleaning the Faceplate TerminalsIf the terminals on the unit or faceplate get dirty,wipe them with a clean soft dry cloth.Before using this unit for the first timeThis unit is initially set on the Demonstration mode.When using this unit for the first time, cancel the (page 51).NOTEThis Class B digital apparatus complies withCanadian ICES-003.Reset button
|
