English|51Other than Standby modeAudio Preset RecallRecalling the sound setup registered by Preset Memory> (page 50).1Select the sourcePress the [SRC] button.2Enter Menu modePress the [MENU] button for at least 1 second."MENU" is displayed.3Select Audio Preset modePush the Control knob towards [FM] or [AM].Select the "Audio Preset" display.4Enter Audio Preset modePress the Control knob for at least 1 second.5Select the Audio Preset RecallPush the Control knob towards [FM] or [AM].Select the "Recall" display.6Recall the Audio PresetPress the Control knob for at least 2 seconds.The "Recall" display blinks 1 time.7Exit Audio Preset modePress the [MENU] button.• The User memory of (page 11) ischanged to the value which was recalled.• The source tone memory item of (page 11) is changed to the value which was recalledby the selected source.In Standby modeDemonstration mode SettingSets the demonstration mode.1Select the Demonstration modePush the Control knob towards [FM] or [AM].Select the "DEMO Mode" display.2Set the Demonstration modePress the Control knob for at least 2 seconds.Each time you press the knob at least 2 seconds,the Demonstration mode alternates between thesettings shown in the table below.DisplaySetting"DEMO Mode : ON"The Demonstration mode function is ON."DEMO Mode : OFF"Exit Demonstration mode (Normal mode).
