Kenwood KDC-PS9018R Instruction Manual

Kenwood KDC-PS9018R Instruction Manual Manual pdf 14 page image

You can turn the non-fading output on and off.Turning non-fading output On/Off :Press the NF button for at least one second to set the functionON or OFF."NF ON" is displayed when the non-fading output is set ON.Non-Fading OutputShut down the audio system temporarily whenever anincoming call is received.TEL mute will not work if a wire is not connected to a car phone.When the telephone rings:When a call is received, "CALL" is displayed and all the unitfunctions are temporarily interrupted.Listening to Audio During a Phone Call:Press the SRC (source) button."CALL" disappears from the display, and the volume of theoriginal source is restored gradually.Turning TEL Mute Off After a Phone Call:Hang up the phone."CALL" disappears from the display.The original source (the one used before the phone call) isreturned to automatically, and the volume restored gradually.NOTETEL MuteSpeaker setting allows the System Q settings to be fine-tunedaccording to the type of speakers.Woofer setting allows for Network configuration according tothe type of subwoofers.Press the SRC button repeatedly to select the standby mode."ALL OFF" is displayed when the standby mode is selected.Press the Q button to enter the speaker setting mode.Each time you press the FM/AM button, the mode switches asfollows:•In speaker setting modePress either the 4 or ¢ button to select the type ofspeaker. The setting switches as follows.Off ( "Speaker Setting OFF" ) /For 6/6x9 in. speaker ( "Speaker Setting 6 * 9/6 inch" ) /For 5/4 in. speaker ( "Speaker Setting 5/4 inch" )/For the OEM speaker ( "Speaker Setting O.E.M.")• In woofer setting modePress either the 4 or ¢ button to select the type of Subwoofer. The setting switches as follows."Woofer OFF" / "12in type A" / "10in type A" / "12in type B" /"10in type B" / "12in type C" / "10in type C" / "8inch" / "12intype D" / "10in type D"Press the Q button to end the speaker setting mode andwoofer setting mode.• Speaker setting function allows for tuning of bass, middle andtreble.• Woofer setting allows for tuing of high-pass filter frequency,low-pass filter frequency and non-fading level.NOTE54Speaker setting modeWoofer setting mode321Speaker & Woofer settingGeneral features— 14 —English