You can choose from three tuning modes: auto seek, presetstation seek, and manual.Display and setting:"Seek Mode Auto 1" : Auto seek tuning mode (Default setting)"Seek Mode Auto 2" : Preset station seek tuning mode"Seek Mode Manual" : Manual tuning modeSelecting Tuning Mode With the local seek function turned on, auto seek tuning skipsstations with relatively poor reception.Display and setting:"Local.S ON" : The local seek function is on."Local.S OFF" : The local seek function is off. (Default setting)Local Seek Function — 37 —You can arrange to have news bulletins interrupt your currentlistening source, including other radio stations. When theNews Bulletin function is on, the PTY News Timeout settingallows you to set the interval during which further newsinterruption cannot take place. You can adjust the PTY newsinterruption period from 10 to 90 minutes for each journey.Display and setting:"News OFF" (Default setting) , "News 00min" - "News 90min"(min= minutes): When you select the news interruption timeout interval, theNews function turns on and the NEWS indicator lights up.When a news bulletin is received, "NEWS" will be displayedand reception will begin at the preset volume.• If you choose the "20min" setting, further news bulletins willnot be received for 20 minutes once the first news bulletin isreceived.• This function is only available if the desired station sends PTY-code for news bulletin or belongs to Network>-Network sending PTY-code for news bulletin.• If you turn on the news bulletin function in the MW/LW band,the band is switched automatically to the FM band.However, the MW/LW band is not returned to when you turnoff the function.NOTENews Bulletin Function with PTY News TimeoutSetting
