Kenwood KDC-PS9018R Instruction Manual

Kenwood KDC-PS9018R Instruction Manual Manual pdf 43 page image

— 43 —TEL MUTEILLUMIEXT.CONT.P.CONT++++FRONT • LFRONT • RREAR • LREAR • R–+NONFADINGREARANTCONTFRONTConnecting Wires to TerminalsWhen only two speakers are being connected to thesystem, connect the connectors either to both thefront output terminals or to both the rear outputterminals (do not mix front and rear). For example, ifyou connect the + connector of the left speaker to afront output terminal, do not connect the - connectorto a rear output terminal.2CAUTIONIf you connect the ignition wire (red) and the batterywire (yellow) to the car chassis (ground), you maycause a short circuit, that in turn may start a fire.Always connect those wires to the power sourcerunning through the fuse box.2WARNINGFM/AM antenna inputRear left output (White)Rear right output (Red)Fuse (10A)Wiring harness(Accessory1)White/BlackGray/BlackGreen/BlackPurple/BlackWhiteGrayGreenPurpleTo front leftspeakerTo front rightspeakerTo rear rightspeakerTo rear leftspeakerIgnition wire (Red)Battery wire (Yellow)Ground wire (Black) - (To car chassis)Ignition keyswitchCar fusebox(Main fuse)ACCCar fuse boxBatteryIf no connections are made, do not let the wire come out from the tab.Front left output (White)Front right output (Red)Non-fading right output (Red)Dimmer control wire (Orange / White)To car light control switchExternal amplifier control wire(Pink / Black)To "EXT.AMP.CONT." terminal of the amplifierhaving the external amp control function.Non-fading left output (White)Power control/Motor antenna control wire(Blue/White)TEL mute wire (Brown)Connect to the terminal that is grounded when eitherthe telephone rings or during conversation.To KENWOOD disc changer/DAB control input/KPA-SD100/KPA-HD100/KPA-SS100To connect these leads, refer to therelevant instruction manuals.NOTEConnect either to the power control terminal whenusing the optional power amplifier, or to the antennacontrol terminal in the vehicle.