Kenwood KDC-PS9018R Instruction Manual

Kenwood KDC-PS9018R Instruction Manual Manual pdf 8 page image

This function amplifies low and high tones when the volume isturned down.The LOUD indicator lights up when the loudness function ison.Turning Loudness On/Off:Press the LOUD button for at least one second to switch theloudness on and off.The loudness function does not affect non-fading pre-out.NOTELoudness• The external disc control mode will differ depending on the unitthat is connected.• To enable the selection of External disc control mode 2/AUXmode, you should connect optional switching adapter KCA-S210A (which allows you to select both External disc controlmode 2 and AUX mode) or CD changer (KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) orswitching adapter CA-C1AX (which allows you to select AUXmode only).During the AUX mode, "AUX" (or AUX-name display) will showin the display. When the CA-C1AX is being used, the AUXMode will replace the External Disc Control Mode.Selecting AUX-name displayPressing the DISP button for at least two seconds during theAUX mode, AUX-name display is blinked for AUX-name selectionmode.Pressing 4 or ¢ button during this mode allows you to select"AUX" , "TV" , "VCP" , "GAME" or "PORTABLE" in the AUX mode.The AUX-name selection mode can be exited by pressing theDISP button or doing nothing for 10 seconds.NOTESwitching Modes:Each time you press the SRC (source) button, the modeswitches as follows:Selecting standby mode:Press the SRC button repeatedly and switch to "ALL OFF" .When "ALL OFF" is displayed, the standby mode is activated.The standby mode turns all functions off while leaving thepower to the unit on. Use this mode when you want to havethe display illuminated but don't want to listen to anything.• The mode switches to the next mode from any mode whichcannot be used.NOTE▼Tuner mode▼CD mode▼External disc control mode 1▼External disc control mode 2 / AUX mode▼Standby modeSwitching ModesThis function allows you to turn down the volume quickly.Turning Attenuator On/Off:Press the ATT button to switch the attenuator on and off.When the attenuator is off, the volume returns to the originallevel.Turning the volume up, or turning it all the way down deactivatesthe attenuator function.NOTEAttenuatorGeneral features— 8 —English