Kenwood KDC-U4549SD Instruction Manual

Also see for KDC-U4549: Service manual

32 EnglishWiring connectionANT. CONTMUTEP.CONTSTEERING WHEELREMOTE INPUTREMOTE CONT–+LRLRBatteryCar fuse box(Main fuse)Black (Ground wire)Yellow (Battery wire)Red (Ignition wire)Blue(Antenna control wire)Light Blue/Yellow(Steering remote controlwire )Brown(Mute control wire)Blue/White(Power control wire)To the metallic body or chassis of the carCar fuse boxACCIgnition key switchDepending on what antenna you are using, connecteither to the control terminal of the motor antenna, orto the power terminal for the booster amplifier of thefilm-type or short pole type antenna.To use the steering wheel remote control feature, youneed to an exclusive remote adapter (not supplied)matches your car is required.To connect the Kenwood navigation system, consultyour navigation manual.(Connect to the terminal that is grounded wheneither the telephone rings or during conversation.KDC-U4549SD/ KDC-U4549 only)When using the optional power amplifier, connect toits power control terminal.To front left speakerAntenna CordFM/AM antennainput (JASO)USB connectorAUX input (Stereo)Use the mini-plug (3.5 mm ø) cablewhich is stereo type and does not haveany resistance.To Kenwood disc changer/ Externaloptional accessory (KDC-U4549SD/KDC-U4549 only)(To connect these leads, refer to therelevant instruction manuals.)Rear outputRear output/ Sub Wooferoutput switchable(page 9)Front outputFront outputKDC-U549BTKDC-U4549SD/ KDC-U4549Sub Woofer outputTo front right speakerTo rear left speakerTo rear right speakerIf no connections are made, do not let the wire come out from the tab.WhiteWiring harness DFuse (10A)GreenGrayPurpleWhite/BlackGreen/BlackGray/BlackPurple/Black