English | 23If “Pairing Success” is displayed, registration iscomplete.6 Return to the device listPress the Control knob.7 Exit the Bluetooth modePress the [SRC] button.⁄• This unit allows up to eight digits to be input for a PIN code.If a PIN code cannot be input from this unit, it can be inputfrom the Bluetooth device.• If the error message appears even though the PIN codeis correct, try the procedure mentioned in special Bluetooth device> (page 23).Registering a special Bluetooth deviceYou can register a special device that cannot beregistered normally (pairing).1 Enter the Bluetooth modePress the [ ] button.“BT MODE” is displayed.2 Enter the Function setting modePress and hold the Control knob.3 Select a Special device registration itemSelect the following items using the Controlknob.“Settings” > “Pairing” > “SPCL Device Select”4 Select the Bluetooth device you wish toregisterTurn the Control knob to select the Bluetoothdevice, and then press the Control knob.If “Completed” is displayed, registration iscompleted.5 Register the selected Bluetooth deviceGo through the procedure mentioned in (page 22)and complete the registration (pairing).Canceling the Bluetooth modePress the [SRC] button.⁄• If the device name is not in the list, select “Other Phones”.1 Enter the Bluetooth modePress and hold the [ ] button.2 Select the Bluetooth device you wish toconnectTurn the Control knob to select the Bluetoothdevice name, and then press the Control knob.3 Select a connection profileTurn the Control knob to select Profile, andthen press the Control knob.Pairing completes with “HF Connect” or “AudioConnect” displayed.“A”: Bluetooth device registered using A2DP(Advanced Audio Distribution Profile)“H“: Bluetooth device registered using HFP (HandsFree Profile).Selecting the Bluetooth device youwish to connectWhen two or more Bluetooth devices have alreadybeen registered, you need to select the Bluetoothdevice you wish to use.1 Enter the Bluetooth modePress the [ ] button.“BT MODE” is displayed.2 Enter the Function setting modePress and hold the Control knob.3 Select a Bluetooth device selection itemSelect the following items using the Controlknob.“Settings” > “Pairing” > “Phone Selection” (toselect the cell-phone) or “Audio Selection” (toselect the audio player)“(name)” is displayed.4 Select a desired Bluetooth deviceTurn the Control knob to select a Bluetoothdevice, and then press the Control knob.‘✱(name)’ or ‘-(name)’ is displayed.“✱”: The selected Bluetooth device is busy.“-”: The selected Bluetooth device is on standby.“ “ (blank): The Bluetooth device is deselected.5 Exit the Bluetooth modePress the [SRC] button.⁄• If a cell-phone is already selected, deselect it, and thenselect a different one.• If you cannot select a device using the audio player,connect the device with the audio player.Simple Bluetooth device selectionIf Bluetooth devices have been registered but noneof them is connected, you can select a Bluetoothdevice using a simple procedure.
