36|KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056BTLEnglish|378-6. Direct music search(Function of remote control)You can search for music by entering the tracknumber.1Press [DIRECT] on the remote control.“– – –” appears and enter the Direct Music searchmode.2Press the number buttons on the remotecontrol to enter the music number.3Press [ENT] on the remote control.Exiting the Direct music search modePress [6] on the remote control.This function cannot be used for a Music Editor media.•This function cannot be used for media for which databaseinformation is added using KENWOOD Music Editor (<8-9.About “KENWOOD Music Editor Light” and “KENWOODMusic Control”> (page 38)).Listen to the CD/ Audio file8-5. Playback modeYou can select a playback mode, such as Randomplay and Repeat play.1Press [SRC] to select a CD/ USB (“CD”/ “USB”)source.Refer to (page 10).2Press [Control] knob.Enters the Function setting mode.3Select “Play Mode” using [Control] knob.For how to use [Control] knob, refer to <3-3. Howto select the item> (page 9).4Select a playback mode function using[Control] knob.DisplayDescription“Disc Random”(CD)/“Folder Random”(Audio file)When set to“ON”, plays the songs in the CD/folder randomly.*(ON) /i(OFF)“All Random”(Audiofile)When set to“ON”, plays all songs in the disc/USB randomly.*(ON) /i(OFF)“Track Repeat”(CD)/“File Repeat”(Audiofile)When set to“ON”, plays the selected songrepeatedly.*(ON) /i(OFF)“Folder Repeat”(Audiofile[1])When set to“ON”, plays the songs in the folderrepeatedly.*(ON) /i(OFF)[1]Except the Music Editor media5Press [Control] knob.The setting is changed.Exiting from the Function setting modePress and hold [1/6].8-7. About the Audio file•Playable Audio filesAAC-LC (.m4a), MP3 (.mp3), WMA (.wma), WAV (.wav)of USB device•Playable disc mediaCD-R/RW/ROM•Playable disc file formatsISO 9660 Level 1/2, Joliet, Long file name.•Playable USB devicesUSB mass storage class•Playable USB device file systemsFAT12, FAT16, FAT32Even if the audio files comply with the standardslisted above, playback may be impossible dependingon the type or condition of the medium or device.•Playback order of the Audio filesIn the example of folder/file tree shown below, filesare played in the order of number from (1) to (6).CD/USB(1)¡(1)23¡(4)4¡(2)¡(3)¡(6)5¡(5);: folder-: Audio fileFor the online manual describing audio files, visitwww.kenwood.com/cs/ce/audiofile/. In this onlinemanual, detailed information and notes which arenot provided in this manual are provided. Make sureto read through the online manual as well.What is a USB device?•In this manual, the term “USB device” indicates a flashmemory or digital audio player which has a USB terminal.8-4. Skip search ratio setting(Music Editor media <8-9. About “KENWOOD MusicEditor Light” and “KENWOOD Music Control”> (page38))You can change the ratio of skip performed asmentioned in <8-3. Skip search> (page 35).1Press [SRC] to select a USB (“USB”) source.Refer to (page 10).2Press [Control] knob.Enters the Function setting mode.3Select “Settings” > “Skip Search” using[Control] knob.For how to use [Control] knob, refer to <3-3. Howto select the item> (page 9).4Select a ratio using [Control] knob.Returns to the previous item.Exiting from the Function setting modePress and hold [1/6].
