Kenwood KDC-X301 Instruction Manual

Also see for KDC-BT21: Instruction manual

Contents

6Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item (see the following table),then press the knob.3 Repeat step 2 until the desired item is selected/activated or followthe instructions stated on the selected item.4 Press and hold to exit.To return to the previous setting item, press .Default: XXTUNER SETTINGAUTOMEMORYYES: Automatically starts memorizing 6 stations with good reception. ;NO: Cancels.• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 5)MONO SET ON: Improves the FM reception, but the stereo effect may be lost. ;OFF: Cancels.NEWS SET (For )ON: The unit will temporarily switch to News Programme if available. ;OFF: Cancels.REGIONAL (For )ON: Switches to another station only in the specific region using the “AF”control. ; OFF: Cancels.AF SET (For )ON: Automatically searches for another station broadcasting the sameprogram in the same Radio Data System network with better receptionwhen the current reception is poor. ; OFF: Cancels.TI ON: Allows the unit to temporarily switch to Traffic Information if available(“TI” lights up). ; OFF: Cancels.RADIOSearch for a station1 Press repeatedly to select TUNER.2 Press repeatedly (or press / on the remotecontrol) to select FM1/FM2/FM3/AM.3 Press S / T (or press S / on the remote control) tosearch for a station.• To change the searching method for S / T: Pressrepeatedly.AUTO1 : Automatically search for a station.AUTO2 : Search for a preset station.MANUAL : Manually search for a station.• To store a station: Press and hold one of the number buttons (1 to 6).• To select a stored station: Press one of the number buttons (1 to 6) (orpress one of the number buttons (1 to 6) on the remote control).Direct Access Tuning (using the remote control)1 Press DIRECT to enter Direct Access Tuning.2 Press the number buttons to enter a frequency.3 Press to search for a station.• To cancel, press or DIRECT.• If no operation is done for 10 seconds after step 2, Direct Access Tuningis automatically canceled.ENGLISH