Kenwood KDC-X301 Instruction Manual

Also see for KDC-BT21: Instruction manual

Contents

ENGLISH 15TUNE START*2 ON: All qualified music channels in theSmartFavorite will start playback from thebeginning of the song. ; OFF: Cancels.SIGNAL LEVEL Shows the strength (NO SIGNAL/WEAK/GOOD/STRONG) of the current received signal.BUFFER USAGE Shows the memory usage (0% to 100%) forReplay buffer.SXM RESET YES: Resets stored channel and lock setting todefault. ; NO: Cancels.*1 Displayed only when [USER DEFINED] is selected.*2 Available only if the connected SiriusXM Vehicle Tuner is SXV200 or laterthat supports SmartFavorites.SiriusXM® Radio (for / ) BLUETOOTH®BLUETOOTH — ConnectionSupported Bluetooth profiles– Hands-Free Profile (HFP)– Advanced Audio Distribution Profile (A2DP)– Audio/Video Remote Control Profile (AVRCP)– Serial Port Profile (SPP)– Phonebook Access Profile (PBAP)Supported Bluetooth codecs– Sub Band Codec (SBC)– Advanced Audio Coding (AAC)Connect the microphone* / : Connect to the microphone input jack. ( 34)Pair and connect a Bluetooth device for the first time1 Press to turn on the unit.2 Search and select this unit model name (KDC-X3**/KDC-BT2*/KDC-MP3**BT/KMR-D3**BT) on the Bluetooth device.“PAIRING” “PASS XXXXXX” Device name “PRESS” “VOLUME KNOB” appearson the display.• For some Bluetooth devices, you may need to enter the Personal IdentificationNumber (PIN) code immediately after searching.3 Press the volume knob to start pairing.“PAIRING OK” appears when pairing is completed.Adjust themicrophone angleSecure using cord clamps(not supplied) if necessary.MIC (microphone input terminal)*Microphone(supplied)Rear panel