Kenwood KDC-X301 Instruction Manual

Also see for KDC-BT21: Instruction manual

Contents

34INSTALLATION/CONNECTIONWiring connection (for / )Fuse (10 A)Output terminalsAntenna terminalCar fuse boxCar fuse boxBatteryIgnition switchBlue/White(Power control wire/Antenna control wire)(12 V 350 mA)Light blue/yellow(Steering remote controlwire)Red (Ignition wire)Yellow (Battery wire)Black (Ground wire)To the metallic body or chassis of the carTo the power control terminal when using theoptional power amplifier or to the antennacontrol terminal in the vehicleBrown(Mute control wire)WhiteGrayGreenPurpleWhite/BlackGray/BlackGreen/BlackPurple/BlackTo connect the Kenwood navigation system,refer your navigation manualTo front speaker (left)To rear speaker (left)To front speaker (right)To rear speaker (right)If no connections are made, do not let the wire come out from the tab.To the steering wheel remote control adapterWhen connecting to an external amplifier, connect its groundwire to the car’s chassis to avoid damaging the unit.IMPORTANT : We recommend installing the unit with a commercially available custom wiring harness specific for your carand leave this job to professionals for your safety. Consult your car audio dealer.Microphone input jack ( 15)ENGLISH