Kenwood KDC-X301 Instruction Manual

Also see for KDC-BT21: Instruction manual

Contents

4GETTING STARTEDSelect the display language and cancel the demonstrationWhen you turn on the power for the first time (or [FACTORY RESET] is set to[YES], 5), the display shows: “SEL LANGUAGE” “PRESS” “VOLUMEKNOB”1 Turn the volume knob to select [ENG] (English) or [SPA] (Spanish),then press the knob.[ENG] is selected for the initial setup.(For / / )Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUMEKNOB”.2 Press the volume knob.[YES] is selected for the initial setup.3 Press the volume knob again.“DEMO OFF” appears.Set the clock and date1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [CLOCK], then press the knob.To adjust the clock3 Turn the volume knob to select [CLOCK ADJUST], then press the knob.4 Turn the volume knob to make the settings, then press the knob.Hour Minute5 Turn the volume knob to select [CLOCK FORMAT], then press the knob.6 Turn the volume knob to select [12H] or [24H], then press the knob.12To set the date7 Turn the volume knob to select [DATE FORMAT], then press the knob.8 Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then pressthe knob.9 Turn the volume knob to select [DATE SET], then press the knob.10 Turn the volume knob to make the settings, then press the knob.Day Month Year or Month Day Year11 Press and hold to exit.To return to the previous setting item, press .Set the initial settings1 Press repeatedly to enter STANDBY.2 Press the volume knob to enter [FUNCTION].3 Turn the volume knob to select an item (see the following table),then press the knob.4 Repeat step 3 until the desired item is selected or activated.5 Press and hold to exit.To return to the previous setting item, press .Default: XXAUDIO CONTROLSWITCHPREOUT(For / )REAR/SUB-W: Selects whether rear speakers or a subwoofer areconnected to the line out terminals on the rear (through an externalamplifier). ( 33, 34)DISPLAYEASY MENU (For / )When entering [FUNCTION]...ON: ZONE 1 illumination changes to white color. ;OFF: ZONE 1 illumination remains as [COLOR SELECT] color. ( 25)• ZONE 2 illumination changes to white color when you enter[FUNCTION], irregardless of the [EASY MENU] setting.• Refer to the illustration on page 25 for ZONE identification.3ENGLISH