ENGLISH 9CD/USB/iPod/ANDROIDSettings to use KENWOOD Remote applicationKENWOOD Remote application is designed to control the KENWOOD carreceiver’s operations from the iPhone/iPod (via USB input terminal).Preparation:Install the latest version of KENWOOD Remote application on your devicebefore connecting. For more information, visit .You can make the settings in the same way as connection via Bluetooth.( 16)Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item (see the following table),then press the knob.3 Repeat step 2 until the desired item is selected or activated.4 Press and hold to exit.To return to the previous setting item, press .Default: XXUSBMUSIC DRIVE DRIVE CHANGE: The next drive ([DRIVE 1] to [DRIVE 4]) is selectedautomatically and playback starts.Repeat steps 1 to 3 to select the following drives.SKIP SEARCH 0.5%/1%/5%/10%: While listening to iPod USB or ANDROID source, selectsthe skip search ratio over the total files.Preparation:Select [ON] for [BUILT-IN AUX] for [SOURCE SELECT]. ( 4)Start listening1 Connect a portable audio player (commercially available).2 Press repeatedly to select AUX.3 Turn on the portable audio player and start playback.Set the AUX nameWhile listening to a portable audio player connected to the unit...1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [SYSTEM], then press the knob.3 Turn the volume knob to select [AUX NAME SET], then press the knob.4 Turn the volume knob to select an item, then press the knob.AUX (default)/DVD/PORTABLE/GAME/VIDEO/TV5 Press and hold to exit.To return to the previous setting item, press .AUXAuxiliary cable from the rearof the unit.Portable audioplayer3.5 mm stereo mini plug with “L” shaped connector(commercially available)
