Kenwood KDC-X5100BT Instruction Manual

Contents

ENGLISH 11BLUETOOTH®Connect with a remote device by One-touch (NFC)Near Field Communication (NFC) enables short-range wirelesscommunication between the unit and remote devices such assmartphones.By holding an NFC-compatible remote device near to the N-Markon the unit (right side of the panel), the unit and remote deviceproceed to complete pairing and established the BLUETOOTHconnection automatically.1 Activate the NFC function on the remote device.Refer to the instruction manual of the remote device for moreinformation.2 Hold the remote device near to the N-Mark on the unit(right side of the panel).The device vibrates when pairing is completed.• Depending on the type of remote device used, the strength ofthe NFC signal may vary. For a stronger NFC signal, user mustunderstand the position of the remote device’s NFC antenna andhence tap the NFC antenna with the NFC logo.• To disconnect, hold the remote device near to the N-Mark on theunit again.• This unit only can recognize and connect to one NFC-compatibledevice at a time.BLUETOOTH — Mobile phoneReceive a callWhen there is an incoming call:• ZONE 2 illuminates in green color and flashes.• The unit answers the call automatically if [AUTO ANSWER] is set to a selectedtime. ( 12)During a call:• ZONE 1 illuminates according to the settings made for [DISPLAY] ( 21) andZONE 2 illuminates in green color.• If you turn off the unit or detach the faceplate, the Bluetooth connection isdisconnected.The following operations may differ or not available depending on theconnected phone.To On the faceplateFirst incoming call...Answer a call Press or the volume knob or one of thenumber buttons (1 to 6).Reject a call Press .End a call Press .