Kenwood KDC-X700DAB Instruction Manual

Contents

15ENGLISH |BLUETOOTH®3 Turn the volume knob quickly to enter alphabet search mode.The first menu (ABCDEFGHIJK) appears. To go to the other menu(LMNOPQRSTUV or WXYZ1 ), press J / K.4 Turn the volume knob or press S / T to select the desired firstletter, then press the knob.• To search with numbers, select “1”.• To search with symbols, select “ ”.5 Turn the volume knob to select a name, then press the knob.6 Turn the volume knob to select a phone number, then press theknob to call.To return to the previous hierarchy, press .Store a contact in memoryYou can store up to 6 contacts.1 Press to enter Bluetooth mode.2 Turn the volume knob to select [CALL HISTORY], [PHONE BOOK], or[NUMBER DIAL], then press the knob.3 Turn the volume knob to select a contact or enter a phone number.If a contact is selected, press the volume knob to show the phonenumber.4 Press and hold one of the number buttons (1 to 6).“STORED” appears when the contact is stored.To erase a contact from the preset memory, select [NUMBER DIAL] instep 2 and store a blank number.Make a call from memory1 Press to enter Bluetooth mode.2 Press one of the number buttons (1 to 6).3 Press the volume knob to call.“NO MEMORY” appears if there is no contacts stored.Delete a contactNot applicable for mobile phone that supports PBAP.1 Press to enter Bluetooth mode.2 Turn the volume knob to select [CALL HISTORY] or [PHONE BOOK], thenpress the knob.3 Turn the volume knob to select a contact.If a contact is selected, press the volume knob to show the phonenumber.4 Press and hold the volume knob to enter delete mode.5 Turn the volume knob to select [DELETE ONE] or [DELETE ALL], thenpress the knob.DELETE ONE: Selected name or phone number in step 3 is deleted.DELETE ALL: All names or phone numbers from the selected menu instep 2 is deleted.6 Turn the volume knob to select [YES] or [NO], then press the knob.Bluetooth mode settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [BT MODE], then press the knob.3 Turn the volume knob to make a selection (see the following table),then press the knob.4 Press and hold to exit.To return to the previous setting item or hierarchy, press .Default: XXPHONE SELECT Selects the phone or audio device to connect or disconnect.AUDIO SELECTDEVICE DELETE 1 Turn the volume knob to select a device to delete, then press theknob.2 Turn the volume knob to select [YES] or [NO], then press the knob.DVC PRIORITY Selects a device to be connected as priority device.“ ” appears in front of the device name set as priority.