5ENGLISH |SOURCE SELECTPANDORA SRC ON: Enables PANDORA in sourceselection. ; OFF: Disables. ( 11)BUILT-IN AUX ON: Enables AUX in source selection. ;OFF: Disables. ( 11)CD READ 1: Automatically distinguishes betweenaudio file disc and music CD. ; 2: Forcesto play as an music CD. No sound can beheard if an audio file disc is played.F/W UPDATEUPDATE SYSTEM / UPDATE BT/ UPDATE DAB1/UPDATE DAB2F/W UP xx.xx/F/W UP xx.x.x/F/W UP VxxxYES: Starts upgrading the firmware. ;NO: Cancels (upgrading is notactivated).For details on how to update thefirmware, see:www.kenwood.com/cs/ce/GETTING STARTED DIGITAL RADIO (DAB)About DAB (Digital Audio Broadcasting)DAB is one of the digital radio broadcastingsystems available today. It can deliverdigital quality sound without any annoyinginterference or signal distortion. Furthermore, itcan carry text, pictures and data.In contrast to FM broadcast, where eachprogram is transmitted on its own frequency,DAB combines several programs (called“services”) to form one “ensemble.”The “primary component” (main radio station)is sometimes accompanied by a “secondarycomponent” which can contain extra programsor other information.Preparation:1 Connect a DAB antenna to the DABantenna jack. ( 25)2 Press B SRC to select DAB.3 Press and hold to start the ServiceList update.“LIST UPDATE” appears and updatestarts. “UPDATED” appears when updatecompletes.Updates take up to 3 minutes. Nointerruption (such as traffic information) ispossible during updates.• To cancel the Service List update: Press andhold again.Start listening1 Press B SRC to select DAB.2 Press J BAND repeatedly (or press #FM+ on RC-406) to select DB1/ DB2/ DB3.3 Press and hold S / T (or press and hold S / T (+) on RC-406) to search for anensemble.4 Press S / T (or press S / T (+) on RC-406) to select an ensemble, service orcomponent to listen.• To change the tuning method for S / T: Press K SEEK repeatedly.AUTO1: Press S / T: Select an ensemble, service or component.Press and hold S / T: Automatically search for an ensemble.AUTO2: Press S / T: Search for a preset service.MANUAL: Press S / T: Select an ensemble, service or component.Press and hold S / T: Manually search for an ensemble.