Kenwood KDC-X700DAB Instruction Manual

Contents

4GETTING STARTEDCancel the demonstrationWhen you turn on the power (or after you reset the unit), the displayshows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”1 Press the volume knob.[YES] is selected for the initial setup.2 Press the volume knob again.“DEMO OFF” appears.Set the clock1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [CLOCK], then press the knob.3 Turn the volume knob to select [CLOCK ADJUST], then press the knob.4 Turn the volume knob to make the settings, then press the knob.Day Hour Minute5 Turn the volume knob to select [CLOCK FORMAT], then press the knob.6 Turn the volume knob to select [12H] or [24H], then press the knob.7 Press and hold to exit.To return to the previous setting item or hierarchy, press .12Set the initial settings1 Press B SRC to enter STANDBY.2 Press the volume knob to enter [FUNCTION].3 Turn the volume knob to make a selection (see the following table),then press the knob.4 Press and hold to exit.To return to the previous setting item or hierarchy, press .Default: XXAUDIO CONTROLSP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inchesor 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimumperformance.DISPLAYEASY MENU ON: Both display and button illumination change to white color whenentering [FUNCTION]. ; OFF: Both display and button illumination remainas [COLOR SELECT] color. ( 18)TUNER SETTINGDAB L-BAND ON: Receives L-BAND ensemble during digital audio reception. ;OFF: Cancels.DAB ANTPOWERON: Supplies power to the DAB antenna. Selects when using the suppliedantenna. ; OFF: Does not supply power. Selects when using passiveantenna without booster. ( 25)PRESET TYPE NORMAL: Memorizes one station for each preset button in each band(FM1/ FM2/ FM3/ MW/ SW1/ SW2/ DB1/ DB2/ DB3). ; MIX: Memorizes onestation for each preset button, regardless of the selected band.SYSTEMKEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.TDF ALARM ON: Activates the alarm if you forget to detach the faceplate when ACC isset to OFF. ; OFF: Deactivates.3