Kenwood KDC-X7200DAB Instruction Manual

Contents

ENGLISH 23AUDIO SETTINGSCrossover settingsBelow are the available setting items for 2-way crossoverand 3-way crossover.SPEAKER SIZESelects according to the connected speaker size foroptimum performance.• The frequency and slope settings are automatically setfor the crossover of the selected speaker.• When 2-way crossover is selected, if [NONE] is selectedfor [TWEETER] of [FRONT], [REAR] and [SUBWOOFER] for[SPEAKER SIZE], the [X ‘ OVER] setting of the speaker is notavailable.• When 3-way crossover is selected, if [NONE] is selectedfor [WOOFER] of [SPEAKER SIZE], the [X’OVER] setting of[WOOFER] is not available.X ‘ OVER• [FRQ]/[FRONT-HPF FRQ]/[REAR-HPF FRQ]/[SW LPF FRQ]/[HPF FRQ]/[LPF FRQ]: Adjusts the crossover frequency forthe selected speakers (high pass filter or low pass filter).If [THROUGH] is selected, all signals are sent to theselected speakers.• [FRONT-HPF SLOPE]/[REAR-HPF SLOPE]/[SW LPF SLOPE]/[HPF SLOPE]/[LPF SLOPE]/[SLOPE]: Adjusts the crossoverslope.Selectable only if a setting other than [THROUGH] isselected for the crossover frequency.• [SW LPF PHASE]/[PHASE]: Selects the phase of the speakeroutput to be in line with the other speaker output.• [GAIN LEFT]/[GAIN RIGHT]/[FRONT-HPF GAIN]/[REAR-HPF GAIN]/[SW LPF GAIN]/[GAIN]: Adjusts the output volume of theselected speaker.2-way crossover setting itemsSPEAKER SIZEFRONT SIZE 8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9/7×10TWEETER SMALL/MIDDLE/LARGE/NONE (not connected)REAR 8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9/7×10/NONE(not connected)SUBWOOFER* 16CM/20CM/25CM/30CM/38CM OVER/NONE (not connected)X ' OVERTWEETER FRQ 1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/10KHZ/12.5KHZGAIN LEFT –8 to 0GAIN RIGHT –8 to 0FRONT HPF FRONT-HPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/120HZ/150HZ/180HZ/220HZ/250HZ/THROUGHFRONT-HPF SLOPE –6DB/–12DB/–18DB/–24DBFRONT-HPF GAIN –8 to 0REAR HPF REAR-HPF FRQ(Refer FRONT HPF settings above.)REAR-HPF SLOPEREAR-HPF GAINSUBWOOFERLPF*SW LPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/120HZ/150HZ/180HZ/220HZ/250HZ/THROUGHSW LPF SLOPE –6DB/–12DB/–18DB/–24DBSW LPF PHASE REVERSE (180°)/NORMAL (0°)SW LPF GAIN –8 to 0* Selectable only when [SUBWOOFER SET] is set to [ON]. ( 22)