Kenwood KDC-X7200DAB Instruction Manual

Contents

ENGLISH 35REMOTE CONTSTEERING WHEELREMOTE INPUTP. CONTANT CONTMUTEPin Color and function (for ISO connectors)A4 Yellow : BatteryA5 Blue/White*1 : Power controlA7 Red : Ignition (ACC)A8 Black : Earth (ground) connectionB1 Purple ] : Rear speaker (right)For 3-way crossover: Tweeter (right)B2 Purple/black [B3 Gray ] : Front speaker (right)For 3-way crossover: Mid range speaker (right)B4 Gray/black [B5 White ] : Front speaker (left)For 3-way crossover: Mid range speaker (left)B6 White/black [B7 Green ] : Rear speaker (left)For 3-way crossover: Tweeter (left)B8 Green/black [INSTALLATION/CONNECTIONAntenna terminalWiring connectionBlue/White*2(Power control wire/Antenna control wire)Light blue/yellow(Steering remotecontrol wire)To the power control terminalwhen using the optional poweramplifier or to the antenna controlterminal in the vehicleBrown(Mute control wire)To connect the Kenwoodnavigation system, refer yournavigation manualIf no connections are made, do not let the wire come outfrom the tab.To the steering wheelremote control adapterConnecting the ISO connectors on some VW/Audi or Opel(Vauxhall) automobilesYou may need to modify the wiring of the supplied wiring harness asillustrated below.UnitVehicleA7 (Red) Ignition wire (Red)A4 (Yellow)Default wiringBattery wire (Yellow)Yellow (A4)Red (Ignition wire)Red (A7)Yellow (Battery wire)ISO connectors NOTE: Total output for Blue/White wire (*1) + (*2) is12 V 350 mA.Fuse (10 A) When connecting to an external amplifier, connect itsground wire to the car’s chassis to avoid damaging the unit.If your car does not have an ISO terminal:We recommend installing the unit with a commerciallyavailable custom wiring harness specific for your car andleave this job to professionals for your safety. Consult yourcar audio dealer.