Kenwood KDC-X7200DAB Instruction Manual

Contents

26 ENGLISHDefault: XXDISPLAYCOLORSELECTSelect color for ALL ZONE, LCD DISPLAY and KEY separately.1 Select a zone. (See the illustration on page 25.)2 Select a color for the selected zone.INITIAL COLOR/VARIABLE SCAN/CUSTOM R/G/B/preset colors*To make your own color, select [CUSTOM R/G/B]. The color you have madewill be stored in [CUSTOM R/G/B].1 Press the volume knob to enter the detailed color adjustment.2 Press S / T to select the color (R/G/B) to adjust.3 Turn the volume knob to adjust the level (0 to 9), then press the knob.DIMMER Dim the illumination.ON: Dimmer is turned on. ; OFF: Cancels.DIMMER TIME: Set the dimmer on and off time.1 Turn the volume knob to adjust the [ON] time, then press the knob.2 Turn the volume knob to adjust the [OFF] time, then press the knob.(Default: [ON]: 18:00; [OFF]: 6:00)BRIGHTNESS 1 Select a zone. (See the illustration on page 25.)2 LEVEL 0 to LEVEL 31: Select your preferred brightness level for theselected zone.TEXT SCROLL AUTO/ONCE: Select whether to scroll the display information automatically,or scroll only once. ; OFF: Cancels.* Preset colors: RED1/RED2/RED3/PURPLE1/PURPLE2/PURPLE3/PURPLE4/BLUE1/BLUE2/BLUE3/SKYBLUE1/SKYBLUE2/LIGHTBLUE/AQUA1/AQUA2/GREEN1/GREEN2/GREEN3/YELLOWGREEN1/YELLOWGREEN2/YELLOW/ORANGE1/ORANGE2/ORANGEREDTROUBLESHOOTINGSymptom RemedyGeneralSound cannot be heard. • Adjust the volume to the optimum level.• Check the cords and connections.“MISWIRING CHECK WIRINGTHEN POWER ON” appears.Turn the power off, then check to be sure theterminals of the speaker wires are insulatedproperly. Turn the power on again.“PROTECTING SEND TOSERVICE” appears.Send the unit to the nearest service center.• Sound cannot be heard.• The unit does not turn on.• Information shown on thedisplay is incorrect.Clean the connectors. ( 29)The unit does not work at all. Reset the unit. ( 3)Digital RadioDAB reception is poor. Make sure [ON] is selected for [DAB ANT POWER].( 5)“DAB ANT ERROR” Check the DAB antenna. If a passive antenna(without a booster) is used, set [DAB ANT POWER]to [OFF]. ( 5)“RELATED SERVICE FOUND” • Press the volume knob to activate Soft-Link.( 8)• Press to cancel.AnalogRadio • Radio reception is poor.• Static noise while listeningto the radio.Connect the antenna firmly.DISPLAY SETTINGS