Kenwood KDC-X959 Instruction Manual

Also see for KDC-X959: Service manual

Setting the Display type.Press the [DISP] button.Each time the button is pressed the Display type switches asshown below.Display Display mode"Display Type D""Display Type A"Switching Display TypeIn Woofer setting modeWoofer type DisplayOFF "Woofer OFF"12 in. A type "12in type A"10 in. A type "10in type A"12 in. B type "12in type B"10 in. B type "10in type B"12 in. C type "12in type C"10 in. C type "10in type C"8 in. type "8inch"12 in. D type "12in type D"10 in. D type "10in type D"5 Exit Speaker & Woofer Setting modePress the [Q] button.Speaker setting allows the System Q settings to be fine-tunedaccording to the type of speakers.Woofer setting allows for Network configuration according to thetype of subwoofers.1 Enter StandbyPress the [SRC] button.Select the "ALL OFF" display.2 Enter Speaker & Woofer Setting modePress the [Q] button."Speaker Setting" is displayed.3 Select the Setting modePress the [FM] or [AM] button.Each time the button is pressed it switches between Speakersetting mode and Woofer setting mode.4 Select the Speaker and Woofer typePress the [4] or [¢] button.Each time the button is pressed the setting switches as shownbelow.In Speaker setting modeSpeaker type DisplayOFF "OFF"For 5 & 4 in. speaker "5/4 inch"For 6 & 6x9 in. speaker "6*9/6inch"For the OEM speaker "O.E.M."Speaker & Woofer SettingGeneral features— 12 —EnglishPictureCharacterinformation display