Kenwood KDC-X959 Instruction Manual

Also see for KDC-X959: Service manual

English— 42 —–+FRONTAUX INNONFADINGREAR— 42 —FM/AM antenna input 1Front left output (White) 23Front right output (Red) 28Fuse (10A) 24To KENWOOD disc changer/DAB control input/KPA-SD100/KPA-HD100/KPA-SS100Wiring harness(Accessory1)2529White/Black32Gray/Black35Green/Black38Purple/BlackWhite31Gray34Green37Purple40To front leftspeaker 30To front rightspeaker 33To rear rightspeaker 39To rear leftspeaker 36Ignition wire (Red) 20Battery wire (Yellow) 21Ground wire (Black) · (To car chassis) 22Ignition keyswitch10Car fuse box(Main fuse)11ACC 13Car fusebox 14Battery 12If no connections are made, do not let the wire come out from the tab.4Rear left output (White)Rear right output (Red)To connect the Disc changer, consult yourDisc changer manual. 3Power control wire (Blue/White) 15Motor antenna control wire (Blue)17Dimmer control wire (Orange / White)185 When using the optional power amplifier,connect to its power control terminal.To car light control switch87 Depending on what antenna you are using,connect either to the control terminal of themotor antenna, or to the power terminal forthe booster amplifier of the film-type antenna.Connecting Wires to TerminalsNon-fading left output (White) 26Non-fading right output (Red) 27AUX left input (White)AUX right input (Red)External amplifier control wire(Pink / Black) 208 To "EXT.AMP.CONT." terminal of the amplifierhaving the external amp control function.