Kenwood KDC-X959 Instruction Manual

Also see for KDC-X959: Service manual

• The Dual Zone System can be used with the optional Auxiliaryinput sources shown below.- KCA-S210A- CA-C1AX- CD changer with an Auxiliary input function installed.The Dual Zone System cannot be used in the built-in Auxiliary input.• This function can be used in Auxiliary input source.• The front channel and rear channel can be set to be the internalsource or the Auxiliary input source. Refer to the System Setting> (page 36).Makes the sound different for the front channel and rearchannel.One side of both the front and rear channels outputs the internalsource sound, and the other side outputs the Auxiliary inputsource sound.Press the [S.A] button for at least 1 second.Each time the button is pressed for at least 1 second Dual ZoneSystem switches ON or OFF.When it’s ON, "Zone 2 ON" is displayed.• When the Dual Zone System is ON, there is no Auxiliary inputsource channel audio control or other effect.• When the Dual Zone System is being used the internal sourcechannel can't be used with an External disc source.• When you set the Dual zone system to ON while the non-fadingpreout is switched ON, the sound of the non-fading preout isn’toutput.Dual Zone System• "AUX"• "TV"• "VCP"• "GAME"• "PORTABLE"• "DVD"4 Exit Auxiliary input display setting modePress the [NAME.S] button.When operation stops for 10 seconds, the name at that time isselected, and Auxiliary input display setting mode closes.— 21 —