— 49 —Troubleshooting GuideMecha Error: Something is wrong with the disc magazine. Or theunit is malfunctioning for some reason.E99➪ Check the disc magazine. And then press the resetbutton on the unit. If the "Mecha Error" code doesnot disappear, consult your nearest service center.Hold Error: The protective circuit in the unit activates when thetemperature inside the automatic disc changerexceeds 60°C (140°F), stopping all operation.E0d➪ Cool down the unit by opening the windows orturning on the air conditioner. As the temperaturefalls below 60°C (140°F), the disc will start playingagain.NO NAME: • Attempted to display DNPS during the CD playhaving no disc names preset.E51• Attempted to display SNPS during the receivingsession of the station having no station namepreset.E50NO TITLE: Attempted to display the disc title or track title whilethe MD having no MD title is being played.E53NO TEXT: • Attempted to display the disc text or track textwhile the CD having no CD text is being played.E54• Attempted to display text during reception of thestation that isn't sending text data.E55• Attempted to display the ID3 tag or contentsdescription while the MP3/WMA having no ID3 tagor contents description is being played. E52Waiting: Radio text data is being received.E56Load: Discs are being exchanged in the Disc changer.E57-1Reading: The unit is reading the data on the disc.E57-2NO ACCESS: After setting it in the Disc Changer, DNPP was donewithout having it been played at least 1 time.E58The messages shown below display your systemscondition.Eject: No disc magazine has been loaded in the changer.The disc magazine is not completely loaded.E01➪ Load the disc magazine properly.No CD in the unit.➪ Insert the CD.No Disc: No disc has been loaded in the disc magazine.E02➪ Load a disc into the disc magazine.TOC Error: No disc has been loaded in the disc magazine.E04➪ Load a disc into the disc magazine.The CD is quite dirty. The CD is upside-down. The CDis scratched a lot.➪ Clean the CD and load it correctly.E-05: The CD is upside-down.E05➪ Load the CD correctly.Blank Disc: Nothing has been recorded on the MD.E10No Track Disc: No tracks are recorded on the MD, although it has atitle.E11No Music Data:Media was played that doesn’t have data recordedthat the unit can play. E15➪ Use media that has data recorded that the unit canplay.Files for picture downloading only are recorded inCD-R/CD-RW.No Panel: The faceplate of the slave unit being connected tothis unit has been removed.E30➪ Replace it.E-77: The unit is malfunctioning for some reason.E77➪ Press the reset button on the unit. If the "E-77"code does not disappear, consult your nearestservice center.