Kenwood KDC-X996 Quick Start Manual

Also see for KDC-BT952HD: Instruction manual

English | 11tape or other similar materials. To preventa short circuit, do not remove the caps onthe ends of the unconnected wires andterminals.t Connect the speaker wires correctly to thecorresponding terminals. The unit maybe damaged or fail to work if you sharethe - wires or ground them to any metalpart in the car.t When connecting only two speakers,connect the connectors either to bothof the front output terminals or to bothof the rear output terminals (do not mixfront and rear terminals). For example, ifyou connect the + connector of the leftspeaker to a front output terminal, donot connect the - connector to a rearoutput terminal.t After the installing the unit, checkwhether the brake lamps, blinkers, wipers,etc. on the car are working properly.t Mount the unit so that the mountingangle is 30° or less.t Reception may become poor if there aremetal objects near the Bluetooth antenna.Bluetooth antenna unitFor Good ReceptionTo assure good reception, note thefollowing:t Communicate with the cell-phone withinthe line-of-sight distance of 10 m (30ft). The communication range becomesshorter depending on the surroundingenvironment. The communicationrange also becomes shorter when thereis an obstacle between this unit andthe cell-phone. The above maximumcommunication range (10 m) is notalways assured.t A broadcast station or walkie-talkielocated nearby can interfere withcommunication due to a too strongsignal.2 CAUTIONInstall this unit in the console of yourvehicle.Do not touch the metal parts of this unitduring and shortly after use of the unit.Metal parts such as the heat sink andenclosure become hot.