Kenwood KDC-X996 Quick Start Manual

Also see for KDC-BT952HD: Instruction manual

4 | Quick Start GuideFirst stepExiting the Demonstration modeTurn off the Demonstration mode whenyou use the unit for the first time afterinstallation.1 Press the [VOL] knob to quit theDemonstration mode when the message“To Cancel Demo Press the volume knob”is displayed (approx. 15 seconds).2 Turn the [VOL] knob to select “YES”, andthen press the [VOL] knob.The Demonstration mode can also becanceled in the Menu List mode.Refer to (page 43) in Instruction manual.Adjusting the Clock1 Press the [MENU] button to enter theMenu List mode.2 The item can be selected anddetermined as follows.”Settings” ➜ “Clock & Date” ➜ “ClockAdjust”To select the item, turn the [VOL] knob.To determine the item, press the [VOL]knob.3 Turn the [VOL] knob to select hour orminute, and then press the [VOL] knob.4 Turn the [VOL] knob to adjust the hourand minute.To determine the item, press the [VOL]knob.5 Press the [MENU] button to finish theclock adjusting.6 Turn the [VOL] knob to select “DateAdjust”, and then press the [VOL] knob.7 Turn the [VOL] knob to select month,date, or year, and then press the [VOL]knob.8 Turn the [VOL] knob to adjust themonth, date, and year.To determine the item, press the [VOL]knob.9 Press the [MENU] button to finish thedate adjusting.10 Turn the [VOL] knob to select “DateMode select”, and then press the [VOL]knob.11 Turn the [VOL] knob to select Dateformat, and then press the [VOL] knob.12 Press the [MENU] knob for at least 1second, and then press it again briefly toexit the Menu List mode.[MENU] [VOL]